Texas Instruments Adpater - Manual (Page 23)

Exiting SetDock
To leave the SetDock utility, complete the following steps:
1. Press Esc.
The Exiting Setup Menu appears.
2. Select one of the following options:
Key Function
Esc Returns you to the main screen
F4 Saves all changes, exits Setup, and reboots
F5 Loads default values for all pages. Use this setting to reload
values if you have had problems during configuration.
Press Esc-F4 afterward to save and exit.
F6 Aborts Setup without saving values
Using the SetDock Utility
Utilities 3-7