Texas Instruments Adpater - Manual (Page 33)

1. Go to TI Setup (located in the TravelMate Notebook
Center group) and select the System Configuration
tab.
2. Ensure that the PCMCIA I/O is changed from
Minimum to Maximum.
3. Press Esc-F4 to save the configuration.
4. Select the Ports-Dock A.
5. Select the correct DockMate type for your DockMate
(DockMate, DockMate, DockMate Plus, DockMate
Multimedia, etc.).
6. Select OK.
You are prompted to reboot.
7. Reboot the computer.
PCMCIA Card Recognition
4-10 Troubleshooting Procedures