Pcmcia card recognition – Texas Instruments Adpater User Manual
Page 31
6.
Close the System Properties window and restart the
system.
Update Device Usage
1.
Go to the System icon located in the Control Panel.
2.
Select Ports (COM & LPT) from the Device Manager tab.
3.
Double-click on Communication Port (COM2).
4.
Select the General tab.
5.
Deselect Dock 1 (Current) located in the Device Usage
area.
6.
Select OK.
Reinstall Hardware
1.
Reinstall all PCMCIA hardware devices one at a time.
Windows 95 should automatically configure software for
each device.
2.
Select the Refresh button on the System Properties
screen and check and correct any conflicts.
n
Note: Conflicts are indicated by a yellow c
symbol where
the device icon would normally be. Go to the Resources tab
to see detailed information about the conflict.
Turn off Automatic Settings
1.
Go to the System icon located in the Control Panel.
2.
Select Ports (COM & LPT) from the Device Manager tab.
3.
Double-click on the icon for each device you have added.
Configuration properties for the selected device appear.
4.
Select Resources.
PCMCIA Card Recognition
4-8 Troubleshooting Procedures