TANDBERG TT1282 - Manual (Page 10)

TT128x High Definition Professional Receiver/Decoder
10
Connect the Receiver to the power supply as follows:
>
Power Supply
Ensure the power supply is isolated and switched off.
>
Receiver
Ensure the correct fuse type and rating has been fitted to both the
equipment and the power cable.
>
Supply Cord
Connect the lead to the Receiver input connector and then to the
power supply. Switch on the power supply.
Table 2.2: Fuse Type and Rating
Power Supply Fuse Type and Rating
100-120 Vac / 220-240 Vac IEC/EN 60127-2 Sheet 5
Bussmann S505/Littelfuse 215
2 A 250 V T HBC
-48 V Bussmann S505/Littelfuse 215
5 A 250 V T HBC