TANDBERG TT1282 - Manual (Page 11)

TT128x High Definition Professional Receiver/Decoder
11
3 Operating the Equipment From the Front Panel
3.1 Introduction
The front panel display and keypad may be used to configure, control
and monitor the Receiver when an external control system is not used.
3.2 Local Control
At power-on the Receiver runs through a boot sequence (boot time is
approximately 15 seconds). The Service menu is displayed (Menu 3).
3.3 Navigation Pushbuttons
Figure 3.1: Front Panel Controls and Pushbuttons
LCD display
Save
Edit Up
Down
Left
Right
Alarm LED
Lock LED