Telos Zephyr iPort User Manual

Page 3

Advertising
background image

Telos Systems USA
2101 Superior Avenue
Cleveland, OH 44114
USA

Telos Europe
Johannisstraße 6
85354 Freising
Germany

Notices and Cautions

CAUTION:

THE INSTALLATION AND SERVICE INSTRUCTIONS IN THIS MANUAL ARE FOR

USE BY QUALIFIED PERSONNEL ONLY. TO AVOID ELECTRIC SHOCK, DO NOT

PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING

INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING

TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.
USA CLASS A COMPUTING DEVICE INFORMATION TO USER. WARNING: This

equipment generates, uses, and can radiate radio-frequency energy. If it is not installed and used as

directed by this manual, it may cause interference to radio communication. This equipment complies

with the limits for a Class A computing device, as specified by FCC Rules, Part 15, Subpart J, which

are designed to provide reasonable protection against such interference when this type of equipment

is operated in a commercial environment. Operation of this equipment in a residential area is likely

to cause interference. If it does, the user will be required to eliminate the interference at the user’s

expense. NOTE: Objectionable interference to TV or radio reception can occur if other devices are

connected to this device without the use of shielded interconnect cables. FCC rules require the use of

shielded cables.
CANADA WARNING: “This digital apparatus does not exceed the Class A limits for radio noise

emissions set out in the Radio Interference Regulations of the Canadian Department of Com-

munications.” “Le present appareil numerique n’emet pas de bruits radioelectriques depassant les

limites applicables aux appareils numeriques (de Class A) prescrites dans le reglement sur le brouillage

radioelectrique edicte par le ministere des Communications du Canada.”

This symbol, wherever it appears, alerts you to the presence

of uninsulated, dangerous voltage inside the enclosure –

voltage which may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important

operating and maintenance instructions. read the manual.

Advertising