Oki 390 - Manual (Page 23)

16 Loading Paper
7. Close tractor covers and adjust left trac-
tor to position edge of paper: reference
marks on printer indicate left edge po-
sition for the two most common paper
sizes. When paper is properly aligned,
lock left tractor in place by pushing back
on lock lever.
8. Adjust right tractor so that paper holes
are centered on pins(careful – if paper
is stretched too tight or left too loose, it
can jam and cause problems), then lock
right tractor in place by pushing back
on lock lever.
9. Set Paper separator and swing wire feed
guide over to rest on pull-up roller as-
sembly to prevent from curling back
into printer.
10.Push FF/LOAD button. Paper will au-
tomatically feed into printer and
ALARM light will go out.
Tractor covers Lock lever
Reference marks
Wire feed guide
FF/LOAD
Micro Feed
Up
ITEM