Oki 390 - Manual (Page 92)

ML390/391 Turbo Printer Handbook 85
Set page format
Set Skip Over Perforation
area
(bottom margin)
Cancel Skip Over Perfora-
tion
Cut Sheet Feeder
Option
Cut Sheet Feeder Control
Character Sets
Copy ROM Character Set
to RAM Character Set
ASCII: ESC (c n
1
n
2
t
1
t
2
b
1
b
2
Dec: 27 40 99 n
1
n
2
t
1
t
2
b
1
b
2
Hex: 1B 28 63 n
1
n
2
t
1
t
2
b
1
b
2
ASCII: ESC N n
Dec: 27 78 n
Hex: 1B 4E n
ASCII: ESC O
Dec: 27 79
Hex: 1B 4F
ASCII: ESC EM n
Dec: 27 25 n
Hex: 1B 19 n
ASCII: ESC : 0 n 0
Dec: 27 58 0 n 0
Hex: 1B 3A 00 n 00
Epson
Function Commands
(ASCII, Decimal, Hexadecimal)
Set the top and bottom margins for the
currently selected paper mode.
n
1
=4, n
2
=0: specifies the number of pa-
rameters (in bytes) to follow.
Top margin=(t
1
+ [t
2
x256]) x (basic unit
in inches)
Bottom margin=(b
1
+[b
2
x256]) x (basic
unit in inches)
The default of basic units 1/360 inch.
Skip Over Perforation feature is deacti-
vated by this command.
Activates Skip Over Perforation feature
and sets it for n lines at the current line
spacing. When Perforation Skip area is
entered, printer will automatically feed
paper down to top of form on next page.
Once this command is entered, the Skip
Over Perforation setting will remain the
same even if line spacing is changed.
n=1 to 255
Deactivates Skip Over Perforation. Com-
mand overrides menu.
Controls Cut Sheet Feeder accessory.
n=1: Select bin 1
n=2: Select bin 2 (if present)
n=73 (ASCII "I"): Insert sheet
n=82 (ASCII "R"): Eject sheet
Copies the designated character set to
the user defined set in RAM:
n=0: Roman
n=1: Swiss
n=2: Courier
n=3: Prestige
n=7: Orator
n=122: Swiss Bold
n=124: Gothic
n=126: MENU setting
Notes