Oki 390 - Manual (Page 89)

82 Appendix C: Priner Commands
Set n /
60
-inch
Line Spacing
Set n /
180
-inch
Line Spacing
Set n /
360
-inch
Line Spacing
Line Feed
n /
180
-inch Line Feed
n /
180
-inch Reverse Line
Feed
n /
360
-inch Line Feed
Set relative vertical print
position
ASCII: ESC A n
Dec: 27 65 n
Hex: 1B 41 n
ASCII: ESC 3 n
Dec: 27 51 n
Hex: 1B 33 n
ASCII: ESC + n or ESC [ n
Dec: 27 43 n or 27 93 n
Hex: 1B 2B n or 1B 5B n
ASCII: LF
Dec: 10
Hex: 0A
ASCII: ESC J n
Dec: 27 74 n
Hex: 1B 4A n
ASCII: ESC j n
Dec: 27 106 n
Hex: 1B 6A n
ASCII: ESC ] n
Dec: 27 93 n
Hex: 1B 5D n
ASCII: ESC (v n
1
n
2
m
1
m
2
Dec: 27 40 118 n
1
n
2
m
1
m
2
Hex: 1B 28 76 n
1
n
2
m
1
m
2
Epson
Function Commands
(ASCII, Decimal, Hexadecimal)
Sets line spacing of n /
60
-inch.
n=0 to 255
n=0: no line feed.
Sets a line spacing of n /
180
-inch.
n=0 to 255
n=0: no line feed
Sets line spacing of n /
360
-inch. ESC [ n is
OKI unique command
n=0 to 255
n=0: no line feed
Prints buffer data and moves the print-
head by the current line spacing value.
Cancels SO and ESC SO commands.
Executes one n /
180
-inch line feed with-
out changing line spacing.
n=0 to 255
n=0: no line feed, but initiates printing
Executes one n /
180
-inch reverse line
feed without changing line spacing.
n=0 to 255
n=0: no line feed, but initiates printing
OKI unique command. Executes n /
360
-
inch line feed without changing line
spacing.
n=0 to 255
n=0: no line feed, but initiates printing
Performs carriage return in the forward
or reverse direction from the current po-
sition.
n
1
=2, n
2
=0: specifies the number of pa-
rameters (inbytes) to follow Amount of
carriage returns executed=
±
(m
1
+[m
2
x256]) x (basic unit in inches) The basic
unit is set by set unit command ESC (U.
The default of basic unit is 1/360 inch.
Forward feeding exceeding approx. 46.2
inches and reverse feeding exceeding
approx. 0.5 inch are invalid. Reverse
feeding is invalid in raster graphics
mode.
Notes