TP-Link TL-WR941ND - Manual (Page 19)

TL-WR941N/TL-WR941ND Wireless N Router
-12-
¾
User Name and Password - Enter the User Name and Password provided by your ISP.
These fields are case sensitive. If you have difficulty with this process, please contact
your ISP.
2） If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-9. Then you can go on with the wireless configuration.
3） If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-8.
Figure 3-8 Quick Setup - Static IP
¾ IP Address - This is the WAN IP address as seen by external users on the Internet
(including your ISP). Enter the IP address into the field.
¾
Subnet Mask - The Subnet Mask is used for the WAN IP address, it is usually
255.255.255.0.
¾
Default Gateway - Enter the gateway IP address into the box if required.
¾
Primary DNS - Enter the DNS Server IP address into the box if required.
¾
Secondary DNS - If your ISP provides another DNS server, enter it into this field.
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-9.