TP-Link TL-WR941ND - Manual (Page 29)

TL-WR941N/TL-WR941ND Wireless N Router
-22-
the Router into the field behind Access Point PIN. Then click Next.
The QSS Configuration Screen of Wireless Adapter
)
Note:
The default PIN code of the Router can be found in its label or the QSS configuration screen as
Figure 4-2 .
c). You will see the following screen when the new device successfully connected to the
network.
)
Note:
a. The status LED on the Router will light green all the time if the device has been successfully
added to the network.
b. The QSS function cannot be configured if the Wireless Function of the Router is disabled.
Please make sure the Wireless Function is enabled before configuring the QSS.