TP-Link TL-WR941ND - Manual (Page 41)

TL-WR941N/TL-WR941ND Wireless N Router
-34-
any of them, and you will be able to configure the corresponding function.
4.6.1 Wireless Settings
Choose menu “Wireless→Wireless Setting”, you can configure the basic settings for the
wireless network on this page.
Figure 4-15 Wireless Settings
¾
SSID - Enter a value of up to 32 characters. The same name of SSID (Service Set
Identification) must be assigned to all wireless devices in your network. Considering your
wireless network security, the default SSID is set to be TP-LINK_xxxxxx (xxxxxx indicates
the last unique six numbers of each Router’s MAC address). This value is case-sensitive.
For example, TP-LINK is NOT the same as tp-link.
¾
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection option.