TP-Link TL-WR941ND - Manual (Page 51)

TL-WR941N/TL-WR941ND Wireless N Router
-44-
addresses. 192.168.1.199 is the default end address.
¾
Address Lease Time - The Address Lease Time is the amount of time a network user will
be allowed connection to the Router with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP Address. After the
time is up, the user will be automatically assigned a new dynamic IP address. The range of
the time is 1 ~ 2880 minutes. The default value is 120 minutes.
¾
Default Gateway - (Optional.) Suggest to input the IP address of the LAN port of the Router,
default value is 192.168.1.1
¾ Default Domain - (Optional.) Input the domain name of your network.
¾
Primary DNS - (Optional.) Input the DNS IP address provided by your ISP. Or consult your
ISP.
¾
Secondary DNS - (Optional.) Input the IP address of another DNS server if your ISP
provides two DNS servers.
)
Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode.
4.7.2 DHCP Clients List
Choose menu “DHCP→DHCP Clients List”, you can view the information about the clients
attached to the Router in the next screen (shown in Figure 4-26).
Figure 4-26 DHCP Clients List
¾ ID - The index of the DHCP Client
¾
Client Name - The name of the DHCP client
¾
MAC Address - The MAC address of the DHCP client
¾
Assigned IP - The IP address that the Router has allocated to the DHCP client.
¾ Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,
a new dynamic IP address will be automatically assigned to the user.