Teledyne Refrigerated Sampler 6712FR - Manual (Page 42)

6712FR Refrigerated Sampler
Section 2 Installation/Preparation
2-12
WARNING
Most Isco flow meters are not certified for use in hazardous
locations as defined by the National Electrical Code.
Contact your Teledyne Isco representative for your
equipment’s status. Never operate equipment in hazardous
locations that has not been certified as safe for such use.
Refer to Appendix C in the back of this manual for more
safety information.
Note
Select Extended Programming to use the SDI-12 sonde. (See
Switching Between Standard and Extended Modes on page
4-1.)
Note
Update the Hardware Setup whenever you add or remove an
SDI-12 sonde. (See Section 6.) In extended programming, rain
gauge and SDI-12 sonde readings are only available if they are
selected in the Hardware Setup.
Rain Gauge
Connector Icon