Tascam SS-R1 - Manual (Page 13)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
12
TEAC Corporation
CLOCK DATA PRESET
Sets the date and time of the controlled device.
Command 27
Machine ID
0
Data 10 bytes or 2 bytes
Description Remarks
Data 1 Tens digit of year
Data 2 Ones digit of year
Data 3 Tens digit of month
Data 4 Ones digit of month
Data 5 Tens digit of day
Data 6 Ones digit of day
Data 7 Tens digit of the
hours
Data 8 Ones digit of the
hours
Data 9 Tens digit of the
minutes
Data 10 Ones digit of the
minutes
e.g., “0802231234” means February 23 rd of year
2008 at 34 minutes past twelve o’clock.
If both Data 1 and Data 2 are “F,” “Sense” is
specified and the SS-R1/SS-CDR1 requests that the
currently programmed Clock Data be returned.
e.g., FF
・ If a date or time outside the possible range is set, the SS-R1/SS-CDR1 will return ILLEGAL
[F2].
Return CLOCK DATA PRESET RETURN [A7]
SYNC REC LEVEL PRESET
Sets the Sync Rec Level of the controlled device.
A return command is returned only if Sense [FF] is specified.
The SYNC REC MODE setting is made by the command "SYNC REC SELECT [38]."
Command 28
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Preset –24dB
0 1 Preset –30dB
0 2 Preset –36dB
0 3 Preset –42dB
0 4 Preset –48dB
0 5 Preset –54dB
0 6 Preset –60dB
0 7 Preset –66dB
0 8 Preset –72dB
F F Sense Requests that the currently preset level be returned.
・ If data outside the above range is received, the SS-R1/SS-CDR1 will return ILLEGAL [F2].
Return SYNC REC LEVEL RETURN [A8]