Tascam SS-R1 - Manual (Page 22)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
21
TEAC Corporation
INFORMATION RETURN
This is the return command in response to the command "INFORMATION REQUEST [0F]."
It returns the software version of the controlled device.
Command 8F
Machine ID
0
Data 4 bytes
Data 1 Tens digit of the software version Example of Data 1 – Data 4
Data 2 Ones digit of the software version 0100 Version 1.00
Data 3 First decimal place of the software
version
Data 4 Second decimal place of the software
version
Request INFORMATION REQUEST [0F]
FLASH LOAD ACKNOWLEDGE
This is the return command in response to the command "FLASH LOAD [17]."
It is transmitted when the data reading is successfully completed.
Command 97
Machine ID
0
Data none
Request/Preset FLASH LOAD [17]
AUTO CUE LEVEL RETURN
This is the return command in response to the command "AUTO CUE LEVEL PRESET [20]."
It returns the currently specified auto cue level.
Command A0
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 –24dB
0 1 –30dB
0 2 –36dB
0 3 –42dB
0 4 –48dB
0 5 -54dB
0 6 –60dB
0 7 –66dB
0 8 –72dB
Request/Preset AUTO CUE LEVEL PRESET [20]