Tascam SS-R1 - Manual (Page 9)

TASCAM SS-R1/SS-CDR1 RS-232C Protocol Specification
8
TEAC Corporation
READY
Puts the controlled device in PLAY-READY mode or RECORD-READY mode.
Command 14
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 1 Ready On Puts the device in PLAY-READY or RECORD-READY
mode.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return none
SHUTTLE
Puts the controlled device in SHUTTLE mode.
SHUTTLE mode will be maintained until a command such as STOP, PLAY, or READY is received.
Command 16
Machine ID
0
Data 2 bytes
Data 1 Data 2 Description Remarks
0 0 Shuttle
Forward Shuttles in the forward direction.
0 1 Shuttle
Reverse Shuttles in the backward direction.
・ If data other than the above is received, the SS-R1/SS-CDR1 will transmit ILLEGAL [F2].
Return none
FLASH LOAD
Puts the controlled device in FLASH LOAD mode.
Command 17
Machine ID
0
Data none
Return
FLASH LOAD ACKNOWLEDGE [97]
EJECT
Ejects CD media from the controlled device.
(If the SS-R1 receives this command, it will transmit ILLEGAL [F2].)
The command will be ignored if a device other than CD is selected on the controlled device.
Command 18
Machine ID
0
Data none
Return none