TC electronic SDN BHD D22 - Manual (Page 12)

10
SETUPS
D22
Analog Device
IN
ANALOG
ANALOG
D22
Digital Device
IN
ANALOG
DIGITAL
D22
Digital Device
IN
DIGITAL
AES 11 ANALOG
Input: Analog
Sample Rate: 48kHz or 44.1kHz
(internal generated clock)
Output: Analog
Input: Analog
Sample Rate: Must be 48kHz or 44.1kHz
(internal generated clock).
Output: AES or S/PDIF
Dither: Same as the resolution on the device
after the D22.
Input: Analog
Sample Rate: EXT DI (AES/EBU or AES 11).
Output: AES or S/PDIF.
Dither: Same as the resolution on the device
after the D22.
Installation note:
A House-clock connected to the Wordclock
Inputs of the D22 and the downstream devices
will enhance jitter rejection.
Fig 1
Fig 2
Fig 3