TC electronic SDN BHD D22 - Manual (Page 20)

18
In page 2
I/O page 2
Press the I/O key twice to enter this page
Analog In
Sensitivity
: -4 to 28dBu Default: 18dBu
Left Trim : -2 to 0dB in 0.1 increments Default: 0
Right Trim : -2 to 0dB in 0.1 increments Default: 0
Please note that setting sensitivity to e.g. 18dBu means that you
need + 18dBu from your mixing console’s Output to reach
0dBFS on the D22 Input.
Analog Out
Range
: -4 to +28dBu Default: 18dBu
Fine Out Left : -2 to 0dB in 0.1 increments Default: 0
Fine Out Right : -2 to 0dB in 0.1 increments Default: 0
Please note that setting the Analog Out parameter to e.g.
+18dBu means that 0dBFS on the D22 Output is the equivalent
of +18dBu on your mixing console’s Input.
Digital I/O
Input Gain
: -18 to +6 dB in 1dB increments Default: 0
Output Gain : -18 to 0 dB in 1dB increments Default: 0
I/O - SETUP