TC electronic SDN BHD D22 - Manual (Page 13)

11
SETUPS
D22
Digital Device
IN
DIGITAL
SYNC IN ANALOG
Digital Device
IN
D22
DIGITAL
DIGITAL
Digital Device
IN
D22
DIGITAL
SYNC IN
SYNC IN
DIGITALREF
fr om Remote Clock
Local Wordclock
Input: Analog
Sample Rate: Sync.
Output: AES or S/PDIF
Dither: Same as the resolution on the device
after the D22.
Installation note:
Wordclock Inputs on the D22 and the down-
stream device may be used to enable jitter
rejection.
Input: Digital
Sample Rate: EXT DI
Output: AES or S/PDIF
Dither: Same as the resolution on the device
after the D22.
Installation note:
Wordclock Inputs on the D22 and the down-
stream device may be used to enable jitter
rejection.
Input: Digital
Sample Rate: Sync.
Sample Rate Conversion: On
Output: AES or S/PDIF
Dither: Same as the resolution on the device
after the D22.
If using both the digital Input and the Sync
Input, these must be syncronized.
The Sample Rate on the device after the D22
must be taken from its digital Input unless the
Sync Input on this device is used.
Fig 4
Fig 5
Fig 6