TC electronic SDN BHD D22 - Manual (Page 9)

7
FRONT PANEL
OK
Confirms operations.
CURSOR
Used to change the position of the
cursor in the display.
ADJUST WHEEL - CONTROL SECTION
Changes parameter values.
RECALL
Recalls/loads RAM or ROM presets.
Preview the presets using the
CONTROL ADJUST wheel and press
OK to confirm/enter your choice.
STORE
For storing and naming presets.
I/O
Input/Output settings.
UTILITY
Setup global parameters here.
- Display - Viewing angle
- Time resolution
- Control Resolution
- Tap Delay
- RS485 CTRL
- External Input
- Meter - Input/Output.
REMOTE ENABLE
Use a RS-485 remote for:
- Recalling presets
- Delay time adjustments.
Use a momentary pedal for:
- Tap Delay time via pulse.
Signal is given at every tap.
Use an alternating pedal for
Bypass.
Use a TC Master Fader as a
digital Master Output fader.
BYPASS
Bypasses the unit.