Tanita Body Composition Analyzer BC-418MA - Manual (Page 6)

GB
GB a Setting the date and time
4.Setting Date and Time
ATHLETIC
STEP ON
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
FEMALE
MALE
ATHLETIC
STEP ON
TIME SET
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
~
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
TIME SET
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
1. Push the [ ] key.
The entire display will begin to flash, and then the
clothes weight input screen will appear.
2. Push the [ ] key.
The date and time input screen will appear.
The upper row of numbers show the year, the middle
row the month and day, and the bottom row the time
(hours and minutes).
If no changes are to be made, press the [ ] key again.
3. Input the present date and time.
Input the appropriate numbers, beginning with the
top row, in the flashing space.
Example: To input May 1, 2001, 6:03 p.m., press in
order the following keys:
If you make an error while inputting a number, press the
[
] key.
This will return you to the previous input space.
4. Press the [ ] key.
The date and time are set, and the clock function is
running.
The display will now return to the step prior to
entering this mode.
The clock function is backed up by the rechargeable battery,
but natural electric discharge of the rechargeable battery
may occur if the device is not in use for an extended period
(more than 2 weeks); this will clear the settings, making it
necessary to reset the date and time.
TIME SET
TIME SET
TIME SET
ƽ
The printer function is ON in the display shown below.
5.Mode Selection
a Setting the number of printouts, the printout language, and the printout items
ATHLETIC
STEP ON
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
~
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
~
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
ATHLETIC
STEP ON
FEMALE
MALE
kg
cm / ft.in
STABILIZED
AGE
% FAT
P T
Set the functions (modes) that you want this equipment to start with. The selected modes will be automatically recorded.
If it is not necessary to change the settings, the equipment will start up when you simply press the [
] key.
1. While holding down the [0] key, press the [ ]
key.
Release the keys after “Prt-1” is displayed on the
screen.
2. Select the number of print outs
Using the numerical keys, enter the quantity of print
outs desired.
The maximum number is nine.
[1]~[9] : Quantity of print outs
[0]
: No printout
3. Language Selection
ƽ
If “0” is selected at step 2, you cannot preset
the language.
The display will automatically change to the language
selection screen. The currently selected language will
be displayed as a number.
Example: (LNG-1) means English.
Select the language desired using the numerical keys.
[1] : English
[2] : French
[3] : German
[4] : Italian
[5] : Spanish
4. Printing selection
Printing contents are selected from numerical keys.
[0] : Short
[1] : Long
5. The display will automatically change to the
measurement screen after all the input has been
completed.
If further change to the print settings is desired,
please turn off the equipment and follow steps 1 - 4
above.
ƽ
The equipment will start up with these settings next time you use it.
Select the number of print outs (0 - 9) and language. (English, French, German, Italian, Spanish)