Ear connectors, Connections – Technicolor - Thomson DTH 7000 E User Manual

Page 18

Advertising
background image

Installation

R

ear connectors

18

The connection setup shown on page 8 provides rapid connection of your DMR. This
setup gives standard-quality sound reproduction and an optimum-quality picture (RGB).
Depending on the connectors available on your other devices or to get maximum
performance out of your DMR, you may need to use other connection setups. Your DMR
has other sockets for these purposes.

1

2

3

4 5 6

7

8

9 10

11 12 13

1.

Antenna output

to TV set.

2.

Antenna input

(cable or external antenna).

3.

AV3 - S-VIDEO input

4.

AV3 - Composite VIDEO input (CVBS)

5.

Analog audio inputs

6.

AV1 - SCART (RGB)

connector to AV

amplifier or TV set

7.

AV2 - SCART (RGB)

connector to decoder,

satellite or cable receiver.

8.

S-VIDEO Output (Ushiden socket Y/C
signal)

: to AV amplifier or TV.

9.

S-VIDEO Output (Ushiden socket Y/C
signal)

: to AV amplifier or TV (standard-

quality picture).

10.

Analog Audio Outputs

to amplifier or

TV.

11.

IR SAT/CABL Output

to control a satellite

or cable receiver.

12-13

Digital Audio Outputs

to amplifier or TV.

Audio connections (sound)

Video connections (picture)

Connections

The table below lists the connectors and quality of your DMR’s output signals. Select one
of the connection setups described for video connection and one of the setups described
for audio connection.

Sound quality

Type of connector used

***

OPTICAL socket (13) (Toslink optical connector – digital signal)

***

COAXIAL socket (12) (RCA socket- digital signal)

**

AUDIO L / R socket (RCA sockets- analog signal)

Picture quality

Type of connector used

***

AV1(TV) (6) or AV2(SAT) (7) sockets (SCART socket–RGB signals)

**

S-VIDEO socket (Ushiden socket- Y/C signal)

*

VIDEO socket (RCA sockets- CVBS signal)

If the connecting cables are not supplied
with your DMR, get good quality cables. Opt
for known brands. The quality of the video
signals available on the SCART input and
output sockets can be adjusted (

k

page 51).

Connection through the scart socket supplies
both video and audio signals. If you choose
the connection using a scart cable, you don’t
need to connect any other sockets.

DTH7000-EN 23/08/02 10:24 Page 18

Advertising