Technicolor - Thomson DTH 7000 E - Manual (Page 32)

Player function R
epeat playback
32
To repeat the playback of a title, chapter, track, scene, selected A-B segment (except on
Video CDs) or entire disc. Your DMR enables you to mark your favourite DVD scenes
or music tracks on audio CDs thanks to a marking function accessible through the
banner.
Repeat playback of a scene between two points
1. Select the Play Mode play function and choose A-B with the Navigation keys.
2. Press ok to memorise the beginning of the scene you want to repeat.
3. Wait a few seconds before pressing again on ok to mark the end of the sequence to be
repeated (point B).
To stop repeating the sequence, select Standard with the Navigation keys or press STOP .
• Repeat playback remains active as long as
the disk is in the DMR, or as long as the
DMR remains switched on.
• Repeat play only works with discs that show
the elapsed time on the display.
• This may not work correctly with certain
discs (Video CDs in PBC mode).
• If during a fast forward or backward reading
the B point is reached, the DMR will proceed
at normal speed from the A point.
• If during a fast search the A point is reached,
the DMR will start reading at normal speed
from the A point.
• The A-B repeat mode will be cancelled if you
press STOP , if the disc is ejected or if
another repeat mode is selected.
Repeat play
During disc playback, press the yellow info key to display the banner. Select the
Play Mode icon in the banner using the Navigation keys. With the Navigation
keys, select one of the following functions:
• Standard
• Repeat Title
• Repeat A-B: Press OK to Set A.
• Press OK to Set B.
• Repeat Disc.
DTH7000-EN 23/08/02 10:24 Page 32