Topcom BUTLER 5020 - Manual (Page 50)

3. HANDSET OPERATION
3.1. Switching the handset On/Off:
To deactivate the handset, press and hold the LINE button for 1 second in the standby mode.
To reactivate the handset press and hold the LINE button again for 1 second.
When the handset is deactivated, no call can be received.
3.2. Making an external call
3.2.1. Direct call
• Press the LINE button, you will hear the external dial tone.
• Enter the telephone number and wait for connection
3.2.2. Pre- dialling
• Enter the telephone number. If needed, you can erase digits by pressing the Erase button C.
• Press the LINE button. The phone number will be dialed automatically.
3.3. Making an internal call
If you have more then 1 handset subscribed to the base, you can make an internal call between the
handsets
• Dial the handset number
• Press the ‘INT’ softkey. The called handset will ring
• Press the LINE button on the called handset and start talking
3.4. Answering / Rejecting an incoming phone call
When there is an incoming call, the telephone number is displayed when send by the network.
The incoming call symbol will blink.
If the number is stored in the Telephone Book, the name will appear.
When the incoming call in an internal call the display shows, INTERNAL:.
When it’s an external call and the number is not transferred (private call), ‘EXTERNAL ---‘ is displayed.
3.4.1. Answering call
To answer an incoming call, press the LINE button.
3.4.2. Reject an external incoming call
On the handset that is ringing:
Press ‘REJ.’ (Reject).
When no other handset is ringing, the calling party will get a busy tone or disconnect signal.
3.4.3. Mute the ringer during an incoming call
On the handset that is ringing:
Press ‘SIL.’ (silence).
The display will still show the incoming number and
will blink until you accepted (press the LINE
key) or reject the call.
3.5. Making an handsfree phone call.
With the Butler 5020 you can make handsfree phone calls.
Press the LINE button, during conversation, for minimum 1 second. You can now proceed the
conversation handsfree via the build is speaker and microphone.
Press the LINE button again for 1 second to stop the hands free mode or press the LINE key short to
disconnect the call
50
Butler 5020
Handl. B5020 euro 18/3/02 12:11 pm Page 50