Topcom BUTLER 5020 - Manual (Page 62)

62
Butler 5020
You can select Tone dialling with long or short flash time.
When you have enabled a setting,
✔ is displayed.
- Press MENU when the unit is in standby mode. .
- Select BASE SETTING by using the UP and DOWN keys.
- Press OK to confirm.
- Select SETUP by using the UP and DOWN keys.
- Press OK to confirm.
- Select DIAL MODE by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired setting by using the UP and DOWN keys.
(PULSE DIAL – TONE R: 300ms TONE R: 100 ms)
- Press OK to enable/disable the selected setting.
- The display shows
✔ (enabled)
- Press ESC to leave the setting.
7. TECHNICAL SPECIFICATIONS:
DECT= Digital Enhanced Cordless Telecommunication
GAP= Generic Access Profile
Frequency Range: 1880~~1900MHz (BW=20MHz)
1920~~1940MHz (BW=20MHz)
RF Channels: 10 Channels
Channel Bandwidth: 1.728 MHz
Modulation: GFSK
Transmission Output Power:
10Mw
Antenna diversity supported Base-Station
Data Transmission Rate:
1.152 Mbps
Speech Encoding: ADPCM ( 32K bps )
Communication Range: OUTDOOR 300 Meters INDOOR 50 Meters
Power Supply:
Base Station:
INPUT AC110 / 230 VAC 60Hz / 50Hz
OUTPUT DC 6.5 V 270mA / DC 7.5V 210mA
Handset: Ni-Mh Rechargeable Battery 1.2V AAA* 3
Operating Time: Standby 80 Hours Talk : 8 Hours
Operating Temperature: 0° To 40°C
Storage Temperature: -20° To 60°C
Dimension: Handset: 135 x 51 x 29 m/m L/W/D
Base Station: 179 x 141 x 42 m/m L/W/D
Charger: 80 x 60 x 110 m/m L/W/D
Weight: Handset: 150g ( Approx )
Base station: 400g ( Approx )
Charger: 80g ( Approx )
Handl. B5020 euro 18/3/02 12:11 pm Page 62