Topcom BUTLER 5020 - Manual (Page 51)

Remark:
• If you press the LINE button shorter then 1 sec. during a call, the call will be disconnected
• If you press the LINE button for 1 second during stand-by mode, the handset will be switched off.
3.6. Changing the speaker volume
The volume of the speaker can be changed via the UP and DOWN key during conversation.
The volume can be changed in 3 levels. If you have reached the highest of lowest level, you will hear a
beep tone.
3.7. Deactivating the microphone (mute)
It is possible to deactivate the microphone during a conversation:
• Press OPT. key
• Select MUTE with the UP and DOWN key.
• Press OK.
• You can now talk freely without the caller hearing you and the Mute symbol appears on the
display.
• Press OK again (within 30 sec), if you want to resume your conversation.
To activate the microphone again:
• Press OPT. key
• Select UNMUTE via the UP and DOWN key.
• Press OK.
• The microphone is reactivated.
3.8. Last number redial
The Butler 5020 saves the 10 last dialed telephone numbers in the redial memory.
• You can enter the Redial list by pushing the UP KEY during stand-by mode.
• Scroll through the Redial memory via the UP and DOWN buttons.
• When the desired number appears on the display, press the LINE button.
• The number will be dialed automatically.
You can also redial a number after pressing the LINE button.
• Press OPT. key
• Select REDIALLING via the UP and DOWN key.
• Press OK.
• Scroll through the Redial memory via the UP and DOWN key to select the desired number.
• Press DIAL, to dial out the telephone number.
• If you want to leave the redial list, press ESC. key
3.9. Calling a number from the Phonebook (see Chapter 6)
The telephone has a Phonebook in which you can store 50 numbers and names.
• Press the PHONEBOOK button
during stand-by mode.
• Scroll through the list by using the UP and DOWN Key.
• When the selected number appears on the display, press the LINE button.
• The number will be dialed automatically.
If you want to change the number before dialling.
• Press the PHONEBOOK button
when the unit is in standby mode.
• Select the desired number in your Phonebook by using the UP and DOWN Key.
• Press OPT.
• Select PRDL (Pre-dial) via the UP and DOWN keys.
ENGLISH
51
Butler 5020
Handl. B5020 euro 18/3/02 12:11 pm Page 51