Topcom BUTLER 5020 - Manual (Page 55)

ENGLISH
55
Butler 5020
- Select VOLUME by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired volume by entering a number (0 off-> 7 high) or by using the UP and DOWN
keys.
- Press OK to confirm or ESC to leave the setting.
5.3. Ringer Melody
You can assign a different melody for internal incoming calls other external incoming calls. You have 10
different melodies
- Press MENU when the unit is in standby mode..
- Select RING SIGNAL by using the UP and DOWN keys.
- Press OK to confirm.
- Select MELODY by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired MSN number, others or Int. by using the UP and DOWN keys.
- Press OK to confirm.
- Select the desired melody by using the UP and DOWN keys or by pressing the according number.
- Press OK to confirm.
- Press ESC to leave the setting.
5.4. Baby call
If you enable this function, the programmed number will be dialed automatically when pushing any
button.
All other functions of the keypad will be disabled until the setting has been cancelled.
5.4.1. Program the baby call number
- Press MENU when the unit is in standby mode..
- Select CONFIG HS by using the UP and DOWN keys.
- Press OK to confirm.
- Select DIRECT CALL by using the UP and DOWN keys.
- Press OK to confirm.
- Select NO. CALLED by using the UP and DOWN keys.
- Press OK to confirm.
- Enter the Baby Call number. Wrong entered digits can be erased by pressing C.
- Press OK to confirm.
5.4.2. Enable/disable the baby call function
The baby call function can only be enabled when the number is programmed.
To enable the baby call function
- Press MENU when the unit is in standby mode..
- Select CONFIG HS by using the UP and DOWN keys.
- Press OK to confirm.
- Select DIRECT CALL by using the UP and DOWN keys.
- Press OK to confirm.
- The display shows ENABLE
- Press OK to confirm.
To disable the baby call function
- Press OPT.
- The display shows DIR CALL OFF
- Press 2 times OK to confirm.
Handl. B5020 euro 18/3/02 12:11 pm Page 55