TP-Link TL-WA601G - Manual (Page 33)

TL-WA601G 108M Wireless Access Point User Guide
¾
Assigned IP Address - The IP address of the AP reserved.
To Reserve IP addresses:
1. Click the Add New... button to add a new Address Reservation entry.
2. Enter the MAC address (The format for the MAC Address is XX-XX-XX-XX-XX-XX.) and IP
address in dotted-decimal notation of the computer you wish to add.
3. Click the Save button when finished.
To modify A Reserved IP address:
1. Select the reserved address entry as you desire, and modify it. If you wish to delete the entry,
make all of the entry fields blank.
2. Click the Save button.
To delete all Reserved IP addresses:
Click the Clear All button.
Click the Save button.
Click the Next button to go to the next page and Click the Previous button to return the previous
page.
)
Note:
The function won't take effect until the AP reboots.
3.6 Wireless Settings
You can configure wireless advanced settings on this page.
Figure 3-20 AP Wireless Advanced Settings
¾ Enable AP Isolation - Isolate all connected wireless stations so that wireless stations can not
access each other through WLAN. This option is available only for AP mode.
¾ Disable short preamble - Disable short preamble and use long preamble only. 802.11b
mode supports only long preamble and this parameter will be ignored.
27