TP-Link TL-WA601G - Manual (Page 36)

TL-WA601G 108M Wireless Access Point User Guide
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
3.7.3 Backup & Restore
This page (shown in Figure 3-25) allows you to save all configuration settings to your local
computer as a file or restore the AP's configuration.
Figure 3-24 Save or Restore the Configuration
Click the Backup button to save all configuration settings to your local computer as a file.
To restore the AP's configuration, follow these instructions:
• Click the Browse button to find the configuration file which you want to restore.
• Click the Restore button to update the configuration with the file whose path is the one
you have input or selected in the blank.
)
Note:
The current configuration will be covered with the uploading configuration file. Wrong process will
lead the device unmanaged. The restoring process lasts for 20 seconds and restart automatically
then. Keep the power of the device on during the process, in case of any damage.
3.7.4 Reboot
This page (shown in Figure 3-25) allows you to reboot the AP.
Figure 3-25 Reboot the AP
Click the Reboot button to reboot the AP.
Some settings of the AP will take effect only after rebooting, which include:
30