TP-Link TL-WA601G - Manual (Page 37)

TL-WA601G 108M Wireless Access Point User Guide
• Change LAN IP Address. (System will reboot automatically)
• DHCP service function.
• Static address assignment of DHCP server.
• Upgrade the firmware of the AP (system will reboot automatically).
• Restore the AP's settings to factory default (system will reboot automatically).
3.7.5 Password
This page (shown in Figure 3-26) allows you to change the factory default user name and
password of the AP.
Figure 3-26 Password
It is strongly recommended that you change the factory default user name and password of the AP.
All users who try to access the AP's web-based utility or Quick Setup will be prompted for the AP's
user name and password.
)
Note:
The new user name and password must not exceed 14 characters in length and must not include
any spaces. Enter the new Password twice to confirm it.
Click the Save button when finished.
Click the Clear All button to clear all.
3.7.6 Syslog
This page (shown in Figure 3-27) allows you to query the Logs of the AP.
31