TP-Link TL-WA601G - Manual (Page 9)

TL-WA601G 108M Wireless Access Point User Guide
1.3 Conventions
The AP or TL-WA601G, or device mentioned in this User guide stands for TL-WA601G 108M
Wireless Access Point without any explanations.
Parameters provided in the pictures are just references for setting up the product, which may differ
from the actual situation.
You can set the parameters according to your demand.
Chapter 2 Hardware Installation
2.1 The Front Panel
Figure 2-1
The LED indicators displayed on the front panel, the status of these LED indicators represent the
device’s working circs. For details, please refer to 2.1.1 LED Explanation
2.1.1 LED Explanation
Name Status Description
Off No Power
Power
On Power on
Off The AP has a hardware error
On The AP is initialising System
Flashing The AP is working properly
Off There is no device linked to the corresponding port
On There is a device linked to the corresponding port but no activity LAN
Flashing There is an active device linked to the corresponding port
Off The Wireless Radio function is disabled
WLAN
Flashing The Wireless Radio function is enabled
3