TP-Link TL-WA601G - Manual (Page 35)

TL-WA601G 108M Wireless Access Point User Guide
Figure 3-22 Firmware Upgrade
New firmware versions are posted at www.tp-link.com and can be downloaded for free. If the AP is
not experiencing difficulties, there is no need to download a more recent firmware version, unless
that version has a new feature that you want to use.
)
Note:
When you upgrade the AP's firmware, you may lose its configuration settings, so make sure you
write down the AP settings before you upgrade its firmware.
To upgrade the AP's firmware, follow these instructions:
1. Download a more recent firmware upgrade file from the TP-LINK website ( www.tp-link.com ).
2. Click Browse to view the folders and select the downloaded file.
3. Click the Upgrade button.
¾ Firmware Version - displays the current firmware version.
¾ Hardware Version - displays the current hardware version. The hardware version of the
upgrade file must accord with the current hardware version.
)
Note:
Do not turn off the AP or press the Reset button while the firmware is being upgraded.
The AP will reboot after the Upgrading has been finished.
3.7.2 Factory Defaults
This page (shown in Figure 3-23) allows you to restore the factory default settings for the AP.
Figure 3-23 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
29