Turbosound TXD series - Manual (Page 10)

user manual
TXD series
The enclosure is fitted with internal M10 threaded rigging points on the top and rear, which allow
single cabinets to be suspended and angled in fixed installations using optional M10 shoulder
eyebolts.
The cabinet is constructed from 15mm (5/8”) birch plywood, and is finished in a durable semi-matt
textured TurboBlue™ paint. Two flush handles are provided on the sides for easy lifting and
carrying. Two Neutrik Speakon NL4MP connectors provide input and parallel connections to
additional TXD series loudspeakers.
TXD-12M
The TXD-12M is a compact passive two-way wedge monitor enclosure designed for use in a wide
variety of live sound, fixed installation and mobile DJ applications that require professional sound
quality in an easily transportable format.
It consists of a 12” reflex-loaded low frequency driver and a 1” high frequency driver on a 40ºH x
70ºV dispersion HF horn in an optimally tuned enclosure. These high grade components are
matched with a third order passive crossover network to ensure a seamless transition between the
HF and LF devices.
The crossover network incorporates a two-stage thermal overload protection system which
prevents damage to the high frequency driver, reacting instantly to large transient peaks while still
allowing wide dynamic range to be maintained. Although the protection system is transparent at
normal operating levels, as the level increases the signal is gradually and imperceptibly
compressed once the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for
maximum rigidity. Its symmetrical shape allows the monitor to be inverted and used as left/right
mirror image pairs.
In addition to its primary function as a floor monitor, the TXD-12M is also suitable for front-of-
house applications and can be used with the integral pole mount socket on top of optional 35mm
poles and loudspeaker stands. Two recessed flush handles are provided for easy lifting and
carrying, and eight rubber feet are fitted. A grey powder-coated perforated steel mesh grille
protects the drive units from damage.
A Neutrik Speakon NL4MP connector is located at each end of the cabinet on recessed panels,
providing input and parallel link connections to additional TXD series monitors.
TXD-15M
The TXD-16M is a switchable passive/biamp two-way wedge monitor enclosure designed for use
in a wide variety of live sound, fixed installation and mobile DJ applications that require
professional sound quality in an easily transportable format.
It consists of a 15” reflex-loaded low frequency driver and a 1” high frequency driver on a 40ºH x
70ºV dispersion HF horn in an optimally tuned enclosure. These high grade components are
TXD series manual
page 10