Turbosound TXD series - Manual (Page 11)

user manual
TXD series
matched with a third order passive crossover network to ensure a seamless transition between the
HF and LF devices.
The crossover network incorporates a two-stage thermal overload protection system which
prevents damage to the high frequency driver, reacting instantly to large transient peaks while still
allowing wide dynamic range to be maintained. Although the protection system is transparent at
normal operating levels, as the level increases the signal is gradually and imperceptibly
compressed once the critical threshold has been reached.
The TXD-15M can also be operated in bi-amp mode with an external crossover and separate
amplifier channels simply by using the single Speakon NL4MD-V-S connector provided. Two
Neutrik Speakon NL4MP connectors are also provided for input and parallel link connections to
additional TXD series monitors.
The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for
maximum rigidity. Its symmetrical shape allows the monitor to be inverted and used as left/right
mirror image pairs.
Two recessed flush handles are provided for easy lifting and carrying, and eight rubber feet are
fitted. A grey powder-coated perforated steel mesh grille protects the drive units from damage.
TXD series manual
page 11