Turbosound TXD series - Manual (Page 6)

user manual
TXD series
PRODUCT RANGE SUMMARY
TXD-081
The TXD-081 is a compact two-way loudspeaker recommended for portable speech and music
reinforcement in an easily transportable cabinet, as well as fixed installation applications requiring
professional quality background sound.
It is an all-passive design featuring an 8” low frequency driver and a 1” high frequency
compression driver on a 100ºH x 60ºV Converging Elliptical Waveguide™ HF horn. The drive units
are matched with an internal passive crossover network to ensure a seamless transition and these
are all housed in an optimally tuned trapezoidal birch plywood enclosure.
The compression driver is protected from accidental damage due to overdriving by an intelligent
protection circuit built into the crossover network which detects signal level, and automatically
attenuates should it approach or exceed potentially damaging levels.
The TXD-081 is equipped with internal rigging points for use with Turbosound wall and ceiling
brackets, and M10 eyebolts. A standard 35mm pole mount is fitted.
The rear panel carries dual Neutrik Speakon NL4MP speaker connectors for input and parallel
connections to an additional TXD series cabinet, or TXD series bass enclosures.
TXD-121
The TXD-121 is a compact trapezoidal passive two-way loudspeaker enclosure designed for use in
a wide variety of live sound, fixed installation and mobile DJ applications that require professional
sound quality in an easily transportable format.
It consists of a 12” reflex-loaded low frequency driver and a 1” high frequency compression driver
on a 70ºH x 40ºV dispersion HF horn in an optimally tuned trapezoidal enclosure. These high-
grade components are matched with an internal second order passive crossover network to
ensure a seamless transition between the HF and LF drivers.
The crossover incorporates a two stage thermal overload protection system which prevents
damage to the high frequency driver, reacting instantly to large transient peaks while still allowing
wide dynamic range to be maintained. Although the protection system is transparent at normal
operating levels, as the level increases the signal is gradually and imperceptibly compressed once
the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for
maximum rigidity. A pole mount socket is fitted for use with optional 35mm poles and
loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying and
four rubber feet are fitted to the bottom of the cabinet. A grey powder-coated perforated steel
mesh grille protects the drivers from damage.
M10 rigging points are provided on the top and rear of the cabinet to enable it to be suspended
and angled in permanent installations using shoulder eyebolts. M8 rigging points are provided on
TXD series manual
page 6