Turbosound TXD series - Manual (Page 7)

user manual
TXD series
the rear of the cabinet for use with Turbosound wall and ceiling brackets. Two Neutrik Speakon
NL4MP speaker connectors are located on the rear panel, providing input and parallel connections
to additional TXD series cabinets or bass enclosures.
TXD-151
The TXD-151 is a trapezoidal passive two-way loudspeaker enclosure designed for use in a wide
variety of live sound, fixed installation and mobile DJ applications that require professional sound
quality in an easily transportable format.
It consists of a 15” reflex-loaded low frequency driver and a 1” high frequency compression driver
on a 70ºH x 40ºV dispersion HF horn in an optimally tuned trapezoidal enclosure. These high-
grade components are matched with an internal second order passive crossover network to
ensure a seamless transition between the HF and LF drivers.
The crossover incorporates a two stage thermal overload protection system which prevents
damage to the high frequency driver, reacting instantly to large transient peaks while still allowing
wide dynamic range to be maintained. Although the protection system is transparent at normal
operating levels, as the level increases the signal is gradually and imperceptibly compressed once
the critical threshold has been reached.
The cabinet is constructed from 15mm (5/8”) birch plywood, screwed and glued together for
maximum rigidity. A pole mount socket is fitted for use with optional 35mm poles and
loudspeaker stands. Two recessed flush handles are provided for easy lifting and carrying and
four rubber feet are fitted to the bottom of the cabinet. A grey powder-coated perforated steel
mesh grille protects the drivers from damage.
M10 rigging points are provided on the top and rear of the cabinet to enable it to be suspended
and angled in permanent installations using shoulder eyebolts. M8 rigging points are provided on
the rear of the cabinet for use with Turbosound wall and ceiling brackets. Two Neutrik Speakon
NL4MP speaker connectors are located on the rear panel, providing input and parallel connections
to additional TXD series cabinets or bass enclosures.
TXD-252
The TXD-252 is a trapezoidal active/passive full range loudspeaker enclosure, designed for use in a
wide variety of live sound, DJ and fixed installation applications.
It consists of two 500 watt (program) 15” low frequency drivers and a 3” coil compression driver
on a rotatable 80°H x 50°V Converging Elliptical Waveguide™, in an optimally tuned birch
plywood cabinet.
Two Speakon NL4MP speaker connectors are provided on the rear panel for input and link
connections when used in passive mode, as well as a third switchable Speakon which is used to
bypass the passive crossover when the cabinet is operated in bi-amplified mode. The internal
TXD series manual
page 7