Tatung TDR-22XX - Manual (Page 17)

TATUNG TDR series Digital Recording System Page 13
3.2 Schedule
This function button (as shown below) is used to setup the schedules.
1. Select the Group
Select the Group number (total 16 groups are available and
programmable).
2. Activate Group
Activate the group by checking the box.
3. Schedule the Recording DATE/TIME and DVR Shutdown Time
• Setup the days of the week (Sunday to Saturday) by checking the box of the
day.
• If you want to assign the recording time (default is 24 hours), setup [Start
Time] and [End Time] by using military time system. (00:00 to 00:00 means
24 hours).
• If you want to assign the shutdown time, check the box of Shutdown Time
and setup the time.
Click on this button to start schedule setup and the screen will display as
follow. (Please follow the 7 steps below)
Note: The shutdown time is
to set the time for turning off
the system, which is different
to the restart system.
Note: For TDR-2209, Camera’s
CH 10 to CH 16 and Motion’s
CH 10 to CH 16 will be useless
even you activate it. For TDR-
2204, Camera’s CH 05 to CH 16
and Motion’s CH 05 to CH 16 will
be useless even you activate it.
Note: Alarm Out 09 to 16 was
not configured in all TDR-22XX
series DVR.