8 voice – Tatung TDR-22XX User Manual
Page 28
TATUNG TDR series Digital Recording System
Page
24
3.8 Voice
This function button (as shown below) is used to setup the voice settings.
1. Check the box of “sound”
Check on this box to enable the sound recording.
2. Adjust the “Play Sound Delay”
Adjust this number to coordinate the synchronization of sound playback and
video playback. The number 700 means the system coordinates the
synchronization every 700 seconds. The faster the image recording speed, the
smaller the delay time should be chosen. This means the two playbacks need
to be coordinated more frequently. However, if the image recording speed is
slow, we may choose longer time (large number) to coordinate the two
playbacks.
3. Check on the box of the channel you want to activate
For TDR-22XX series, audio can be recorded only in channel one (01).
4. EXIT
You may click any other icon to exit Voice Setup Mode and go directly into other
setup mode. Or click EXIT button to go back to Watch Mode.
Click on this button to setup the voice, the screen display as the below
(Please follow the steps)
Note: To have a better voice
play back quality. The image
recording speed is better to set
to mote than 2 FPS.
Audio
Channel
one