Tatung TDR-22XX - Manual (Page 8)

TATUNG TDR series Digital Recording System Page 4
7. Full SCR Button
This button allows you to hide all buttons and icons and enlarge the
display windows to the FULL SCREEN. You have to right click to get
back to normal. Once you get the full screen, if you LEFT click, the
screen can not go back to normal, instead, the picture the mouse
arrow sitting on will be enlarged to full screen.
8. Motion Button
Click to enable the motion tracking function. This is a very powerful
function which allows you to track a moving object from one channel
to another. All image windows this object passed by will be enlarged
one by one.
9. Setup Button
Click to switch to SETUP MODE. The setup mode includes buttons of
CHANNEL, SCHEDULE, SPEED, COLOR, MOTION, P/T/Z
PROTOCOL, PASSWORD, and VOICE. With these buttons your
system can be custom- programmed to fit your operation needs.
10. Search Button
Click to switch to SEARCH MODE. In this mode, you may either use
LOG button to check the image database or use DATE/TIME button
to get the recorded images within seconds. The images found may
either print out or save to a floppy disk for your emergency needs.
The usage of the storage can be found by STORAGE button.
11. Backup Button
Click to switch to BACKUP MODE. In this mode, you may either
choose auto-backup function to save images to a second removable
hard disk or choose AVI backup function to save images onto a
CDRW available from this system.
12. Control Button
Click to switch to CONTROL MODE. In this mode the
PAN/TILT/ZOOM of each camera can be controlled by clicking the
buttons on the screen.
13. On/Off Button
Click to turn off the entire system.
14. Display windows
Display camera images on 1, 4, 9 or 16 windows depending on your
selection. Left click a window will enlarge the picture in that specific
window. And left click again the picture will go back to the normal
size. RIGHT click any window will hide all buttons and icons and
enlarge all pictures. And right click again will go back to normal
15. On Screen Display (OSD)
Display the camera name and recording status. The recording status
indicates camera active or inactive and the recording method
(continuous recording, motion recording or alarm recording).