TP-Link TL-SL3452 - Manual (Page 101)


Packets with Errors — Displays the number of error packets received from the selected interface.
Transmit Statistics
Total Bytes (Octets) — Displays the number of octets transmitted from the selected interface.
Unicast Packets — Displays the number of Unicast packets transmitted from the selected interface.
Multicast Packets — Displays the number of Multicast packets transmitted from the selected interface.
Broadcast Packets — Displays the number of Broadcast packets transmitted from the selected interface.
2. Select an interface in the Interface field. The interface statistics are displayed.
To reset interface statistics counters:
1. Open the Interface Statistics Page.
2. Click . The interface statistics counters are cleared.
15.1.2 Viewing Etherlike Statistics
The Etherlike Statistics Page contains interface statistics.
To view Etherlike interface statistics:
1. Click
System > Statistics > Interface Statistics > Etherlike. The Etherlike Statistics Page opens:
Figure 133: Etherlike Statistics Page
The Etherlike Statistics Page contains the following fields:
Interface — Indicates the device for which statistics are
displayed. The possible field values are:
– Port — Defines the specific port for which Etherlike
statistics are displayed.
– LAG — Defines the specific LAG for which Etherlike
statistics are displayed.
Refresh Rate — Defines the amount of time that
passes before the interface statistics are refreshed. The
possible field values are:
– 15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Etherlike statistics are not refreshed.
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the selected interface.
Single Collision Frames — Displays the number of single collision frames received on the selected interface.
Late Collisions — Displays the number of late collision frames received on the selected interface.
Excessive Collisions — Displays the number of excessive collisions received on the selected interface.
Internal MAC Transmit Errors — Displays the number of internal MAC transmit errors on the selected interface.
Oversize Packets — Displays the number of oversized packet errors on the selected interface.
Internal MAC Receive Errors — Number of internal MAC received errors on the selected interface.
Received Pause Frames — Displays the number of received paused frames on the selected interface.
Transmitted Paused Frames — Displays the number of paused frames transmitted from the selected interface.
2. Select an interface (Port or LAG) in the Interface field. The Etherlike statistics are displayed.















