TP-Link TL-SL3452 - Manual (Page 102)


To update the refresh time:
To change the refresh rate for statistics, select another rate from the Refresh Rate dropdown list.
To reset Etherlike interface statistics counters:
1. Open the Etherlike Statistics Page.
2. Click . The Etherlike interface statistics counters are cleared.
15.1.3 Viewing GVRP Statistics
The GVRP Statistics Page contains device statistics for GVRP.
To view GVRP interface statistics:
1. Click
System > Statistics > Interface Statistics > GVRP. The GVRP Statistics Page opens:
Figure 134: GVRP Statistics Page
The GVRP Statistics Page contains the following fields:
Interface — Specifies the interface type for which the
statistics are displayed.
– Port — Indicates port statistics are displayed.
– LAG — Indicates LAG statistics are displayed.
Refresh Rate — Indicates the amount of time that
passes before the GVRP statistics are refreshed. The
possible field values are:
– 15 Sec — Indicates that the GVRP statistics are
refreshed every 15 seconds.
– 30 Sec — Indicates that the GVRP statistics are
refreshed every 30 seconds.
– 60 Sec — Indicates that the GVRP statistics are
refreshed every 60 seconds.
– No Refresh — Indicates that the GVRP statistics are not refreshed.
Join Empty — Displays the device GVRP Join Empty statistics.
Empty — Displays the device GVRP Empty statistics.
Leave Empty — Displays the device GVRP Leave Empty statistics.
Join In — Displays the device GVRP Join In statistics.
Leave In — Displays the device GVRP Leave in statistics.
Leave All — Displays the device GVRP Leave all statistics.
Invalid Protocol ID — Displays the device GVRP Invalid Protocol ID statistics.
Invalid Attribute Type — Displays the device GVRP Invalid Attribute ID statistics.
Invalid Attribute Value — Displays the device GVRP Invalid Attribute Value statistics.
Invalid Attribute Length — Displays the device GVRP Invalid Attribute Length statistics.
Invalid Event — Displays the device GVRP Invalid Event statistics.
2. Select an interface (Port or LAG) in the Interface field. The GVRP statistics are displayed.
To update the refresh time:
To change the refresh rate for statistics, select another rate from the Refresh Rate dropdown list.
To reset GVRP interface statistics counters:














