TP-Link TL-SL3452 - Manual (Page 83)


the device is updated.
To modify SNMP Group Membership settings:
1. Click
System > SNMP Management > Security > Communities. The SNMP Community Settings Page opens:
Figure 111: SNMP Community Settings Page
2. Modify the SNMP Management Station, Community
String, and Basic or Advanced fields.
3. Click . The SNMP community is modified,
and the device is updated.
11.4 Configuring SNMP Notification Settings
This section describes configuring of SNMP Notifications, and contains the following topics:
Defining SNMP Notification Properties
Defining Notification Filters
Defining Notification Receivers
11.4.1 Defining SNMP Notification Properties
The SNMP Notification Properties Page contains parameters for defining SNMP notification parameters.
To define SNMP notification global parameters:
1. Click
System > SNMP Management > Notification > Properties. The SNMP Notification Properties Page opens:
Figure 112: SNMP Notification Properties Page
The SNMP Notification Properties Page contains the
following fields:
Enable SNMP Notifications — Specifies whether the
device can send SNMP notifications. The possible field
values are:
– Enable — Enables SNMP notifications.
– Disable — Disables SNMP notifications.
Enable Authentication Notifications — Specifies whether SNMP authentication failure notification is enabled on the
device. The possible field values are:
– Enable — Enables the device to send authentication failure notifications.
– Disable — Disables the device from sending authentication failure notifications.
2. Define the Enable SNMP Notification and Enable Authentication Notifications fields.
3. Click . The SNMP notification properties are defined, and the device is updated.
11.4.2 Defining Notification Filters
The SNMP Notification FiIter Page permits filtering traps based on OIDs. Each OID is linked to a device feature or a portion
of a feature. The SNMP Notification FiIter Page also allows network managers to filter notifications.
To define notification filters:




