TP-Link TL-SL3452 - Manual (Page 70)


Figure 89: MSTP Properties Page
The MSTP Properties Page contains the following fields:
Region Name — Indicates the name of the user-
defined STP region.
Revision — Indicates that an unsigned 16-bit number
that identifies the revision of the current MSTP
configuration. The revision number is required as part
of the MSTP configuration.
The possible range is 0-65535.
Max Hops — Specifies the total number of hops that occur in a specific region before the BPDU is discarded. Once the
BPDU is discarded, the port information is aged out. The possible field range is 1-40. The default value is 20 hops.
IST Master — Identifies the Spanning Tree Master instance. The IST Master is the specified instance root.
2. Define the Region Name, Revision and Max Hops fields.
3. Click . The device information is updated.
9.3.2 Configuring MSTP Instances
MSTP maps VLANs into STP instances. Packets assigned to various VLANs are transmitted along different paths within
Multiple Spanning Tree Regions (MST Regions). Regions are one or more Multiple Spanning Tree bridges by which frames
can be transmitted. In configuring MSTP, the MST region to which the device belongs is defined. A configuration consists of
the name, revision, and region to which the device belongs.
Network administrators can define the MSTP instance settings using the MSTP Instance Settings Page.
To define instance settings for MSTP:
1. Click
System > Bridging Config > Spanning Tree > MSTP > Instance Settings. The MSTP Instance Settings Page
opens:
Figure 90: MSTP Instance Settings Page
The MSTP Instance Settings Page page contains the
following fields:
Instance ID — Specifies the VLAN group to which the
interface is assigned.
Included VLAN — Maps the selected VLANs to
the selected instance. Each VLAN belongs to one
instance.
Bridge Priority — Specifies the selected spanning
tree instance device priority. The field range is 0-61440
Designated Root Bridge ID — Indicates the ID of the
bridge with the lowest path cost to the instance ID.
Root Port — Indicates the selected instance’s root port.
Root Path Cost — Indicates the selected instance’s path cost.
Bridge ID — Indicates the bridge ID of the selected instance.
Remaining Hops — Indicates the number of hops remaining to the next destination.
2. Define the fields.











