Test-Um VALIDATOR-NT NT955 - Manual (Page 71)

70
Test-Um NT955 Series
Placing Tone On a Cable Pair
1. Select Manual Tests. Choose Data, Phone or 2-wire cable
type.
2. The Manual Test Menu for the cable type you selected displays.
3. Select Tone.
4. Select the desired Tone Sound. Press Accept. The cursor
moves to the Tone Path dialog box. (Figure 5.6)
5. Select the Tone Path by choosing the cable pair or pairs you
wish to apply Tone to. Press Accept.
6. Using the appropriate cable assembly, connect the cable to the
Main unit jacks.
7. Press the Send (F1) soft key to start the tone.
8. Using a Tone Tracer, such as Test-Um’s TT100, trace the tone.
SEND
Tone Sound:
Data Tone
Untitled1.job
High - Low
Tone Path:
Press send to begin.
all
Test-Um Inc.
validator 100%
2005 Aug 25
10:53:01
Figure 5.6 Tone Generator
Validator TM Running Manual Tests