Test-Um VALIDATOR-NT NT955 - Manual (Page 80)

79
Test-Um NT955 Series
6.2. Ping Test
The Ping Test is used to verify connectivity to resources on or off the
network and IP addresses. The Ping Test will simultaneously Ping up
to seven different IP addresses and can be run in DHCP or manual
addressing modes.
In DHCP mode, the Validator-NT’s assigned address and the addresses
of the router/gateway and DNS server plus the net mask are obtained
automatically from a DHCP server and the values displayed on the
Validator-NT. Press Get IP Parameters to start the DHCP request
process.
IP Address
Untitled1.job 2005 Aug 25
10:53:01
DNS
For manual IP address, uncheck DHCP. Netmask is count of 1 bits
GW/RTR
My IP
DHCP
192.168.1.200 / 24
My IP: 192.168.1.109
Netmask (CIDR): 255.255.255.0 (24)
Gateway/Router (GW/RTR): 192.168.1.1
Domain Name Server (DNS): 192.168.1.100
Get IP
Parameters
Test-Um Inc.
validator
DELETE TARGETS BACKSPC PINGTOOL
100%
Figure 6.8 DHCP Mode Ping Test Results
Validator TM Network Tests