TP-Link TL-WN7200ND - Manual (Page 20)

150Mbps High Power Wireless USB Adapter User Guide TL-WN7200ND
- 15 -
3.1.4 Statistics
Click the Statistics tab of the Utility and you will see the following screen displaying the receiving
and transmitting statistical information. Click the Reset Counter button to reset the count of the
statistics information.
Figure 3-7 Statistics tab
3.1.5 QSS
Click the QSS tab of the Utility and you can configure the QSS function to joint an existing network
quickly in the following screen.
Figure 3-8 QSS tab
¾ The QSS connection will be automatically displayed on the QSS Profile List. Pitch on the
Profile and click Export Profile to add a Profile to the Profile List (Section 3.1.1).
¾ The Auto function is default to enable that the adapter will automatically try to build the
connection with the Access Point devices shown in the QSS AP List one by one.
¾ You can also establish a wireless connection by using either Push QSS Button method or
PIN method. It is recommended that you choose the simplest method that your AP device
supports.