TP-Link TL-WN7200ND User Manual
Page 35
Advertising
150Mbps High Power Wireless USB Adapter
User Guide
TL-WN7200ND
- 30 -
Figure 5-4
Step 8.
In the prompt page shown below, select Use the Following IP Address, and set the IP
and Subnet mask. After completing setting, click OK.
Figure 5-5
)
Note:
Please set the IP address in different network segment with the other network card to avoid
conflict.
Step 9.
Launch TP-LINK Wireless Utility, then highlight the Network Name (SSID) beginning
with “PSP” in the “Network” page, and click Connect.
Advertising