TP-Link TL-WN7200ND - Manual (Page 27)

150Mbps High Power Wireless USB Adapter User Guide TL-WN7200ND
- 22 -
Figure 4-3 Config Setting Page
¾ SSID – Enter the SSID of your soft AP, or you can press “<- Use Mac Address” button to
keep the Mac Address as your SSID.
¾ Channel – Select the channel from the drop-down list. This field determines which operating
frequency will be used.
¾ Beacon – Enter a value between 20-1000 milliseconds for Beacon Interval here. The
beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
¾ TX Power –Manually force the AP’s transmitting power. System default is 100%.
¾ Idle Time - Manually force the Idle Time using a selected value. The default is 300.
4.2 Access Control
Click the Access Control tab of the utility and the Access Control screen will appear as Figure
4-4. In this page, you can enable/disable the AP to connect with the specified Mac address.