Texas Instruments 3000 - Manual (Page 91)

Using a Password
Installing a Password
Install a password as follows.
1. Highlight Install Password on the Password Utility menu and press the
Enter key. The following menu displays:
2. Type a password of up to eight characters and press the Enter key.
3. Press the Enter key again to install the new password, or press the Esc
key to cancel the action and return to the Password Utility menu.
If you have already installed a password, when you select Install Password, the computer
displays the following message:
Password already exists
Press any key on the keyboard to return to the Password Utility menu.
5-10 Application Programs